The FM203 Duel Soldering, Desoldering and Rework Station is a compact, duel port soldering station that enables soldering, desoldering, and SMD rework all with a single unit. The FM-203 twin ports allow for simultaneous use of a variety of soldering, desoldering and rework tools. The FM-203 comes supplied with a soldering iron (Hakko FM2027) but is also compatible with the below tools:
- FM2032 Micro-Soldering Iron for small or intricate components,
- FM2030 Heavy Duty Soldering Iron for larger components
- FM2026 and FM2031 Nitrogen Soldering Irons (requires N2 Source) for improved work flow.
- FM2022 and FM-2023 SMD Hot Tweezer Rework tools
- FM2024 Desoldering gun (requires compressed air source and desolder control box)
Please see below examples of tool combinations in the two channels D and S. Note: some combinations are not possible due to the power consumption of the hand piece. |
Simultaneous use |
Channel D |
Channel S |
Yes |
HAKKO FM2027
Soldering iron
|
HAKKO FM2027
Soldering iron
/div>
HAKKO FM2024 (*)
Desoldering tool
HAKKO FM-2026 (**)
N2 soldering iron
Micro soldering iron
|
No
Either one of handpieces operates |
HAKKO FM2022
Rework tool
(direct heat-type)
|
No
Either one of handpieces operates |
HAKKO FM2023
Rework tool
(direct heat-type)
|
No
Either one of handpieces operates |
HAKKO FM2030
Heavy duty
soldering iron
|
No
Either one of handpieces operates |
HAKKO FM-2031
N2 heavy duty
soldering iron
|
Yes |
HAKKO FM2024 (*)
Desoldering tool
|
Yes |
HAKKO FM2026(*2)
N2 soldering iron
|
Yes |
HAKKO FM2032
Micro soldering iron
|
* For HAKKO FM2024, each handpiece needs a desoldering control box and compressor. |
** For HAKKO FM2026, each handpiece needs an N2 generator (HAKKO FX780), flowmeter (HAKKO FX791), compressor, regulator, etc. For further details, refer to the combination examples. |
|
Poweful thermal recovery performance |
See how much its thermal recovery is improved by using a composite tip |
|
Power save function |
Sleep function |
: |
While the handpiece is being placed on the iron holder (HAKKO FH-200), the sleep function is activated and decreases the temperature of tip on the holder up to approximately 200°C , preventing the tip from being oxidized. In addition, this function can relieve the load applied to the tip due to the high-temperature settings required for lead-free soldering. |
Auto power shut-off function |
: |
By connecting the iron holder (HAKKO FH-200) and station with the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.
|
Combined use with an optional handpiece (HAKKO FM2026, etc.) enables use of the N2system |
Buzzer ON/OFF setting is available |
Buzzer ON/OFF setting control the buzzer sound for errors when the target temperature is achieved. |
Soldering Tip / Nozzle
For the HAKKO FM-203, soldering iron tips are not supplied as accessories. Please purchase soldering iron tips.
- T12 Series (Soldering) for Japan, Oceania, Asia & Other countries.
- T15 Series (Soldering) for Nouth America & EU.
New Tip Shape Concave type
This type has a concave (or V-groove) at the end. It provides excellent heat supply to solder joint and ensures sufficient solder flow-up.
Concave type
|
|
New Tip Shape Concave type This type has a concave (or V-groove) at the end. It provides excellent heat supply to solder joint and ensures sufficient solder flow-up.
Concave type
|
T12 Series
Shape BCM/CM
How to use the BCM/CM and examples
- T12-BCM2 Shape-2BC Bevel with indent
- Special Applictions Type
- T12-BCM3 Shape-3BC Bevel with indent
- Special Applictions Type
Shape BC/C
- T12-BCF1 Shape-1BC
- Tinned cut surface only
- T12-BCF2 Shape-2BC
- Tinned cut surface only
- T12-BCF3 Shape-3BC
- Tinned cut surface only
- T12-CF4 Shape-4C
- Tinned cut surface only
- T12-SBC04 Shape-0.4SBC
- Narrow-pitch Soldering Type (Shape S)
Shape D
- T12-DL32 Shape-3.2D Long
- Just joined as standard tip.
Shape J
- T12-J02 Shape-0.2J (Shape-0.2RSB)
- T12-JL02 Shape-0.2JL (Shape-0.2RLB)
- T12-JS02 Shape-0.2JS (Shape-0.2RSSB)
Shape K
- T12-KL Shape-KL
- For drag soldering for left-handed.
SMD Type : Shape Quad
- T12-1201 Quad
- SMD TypeSize 13.6 x 8.5
- T12-1202 Quad
- SMD TypeSize 10.3 x 10.3
- T12-1203 Quad
- SMD TypeSize 12.8 x 12.8
- T12-1204 Quad
- SMD TypeSize 17.9 x 17.9
- T12-1205 Quad
- SMD TypeSize 23.4 x 17.3
- T12-1206 Quad
- SMD TypeSize 22.5 x 16.5
- T12-1207 Quad
- SMD TypeSize 15.5 x 15.5
- T12-1208 Quad
- SMD TypeSize 15.8 x 15.8
- T12-1209 Quad
- SMD TypeSize 8.4 x 8.4
- T12-1210 Quad
- SMD TypeSize 15.4 x 12.8
SMD Type : Shape Tunnel
- T12-1001 Tunnel
- SMD TypeSize 5.1 x 4.6
- T12-1002 Tunnel
- SMD TypeSize 5.1 x 10.4
- T12-1003 Tunnel
- SMD TypeSize 9.5 x 18.3
- T12-1004 Tunnel
- SMD TypeSize 9.5 x 15.8
- T12-1005 Tunnel
- SMD TypeSize 9.5 x 13.2
- T12-1006 Tunnel
- SMD TypeSize 6.9 x 11.4
- T12-1007 Tunnel
- SMD TypeSize 7.9 x 18.8
- T12-1008 Tunnel
- SMD TypeSize 19.5 x 10.2
- T12-1009 Tunnel
- SMD TypeSize 13.4 x 20.5
- T12-1010 Tunnel
- SMD TypeSize 19.5 x 12
SMD Type : Shape Spatula
- T12-1401 Spatula
- SMD TypeSize 10.4
- T12-1402 Spatula
- SMD TypeSize 15.7
- T12-1403 Spatula
- SMD TypeSize 21.2
- T12-1406 Spatula
- SMD TypeSize 40
Shape SB
- T12-SB02 Shape-0.2SB
- Narrow-pitch Soldering Type (Shape S)
- T12-SB03 Shape-0.3SB
- Narrow-pitch Soldering Type (Shape S)
- T12-SB05 Shape-0.5SB
- Narrow-pitch Soldering Type (Shape S)
- T12-SB08 Shape-0.8SB
- Narrow-pitch Soldering Type (Shape S)
- T12-SBS04 Shape-0.4SBS
- Narrow-pitch Soldering Type (Shape S)
- T12-SBS07 Shape-0.7SBS
- Narrow-pitch Soldering Type (Shape S)
Special Applications Type
- T12-1603 Shape-Long reach chisel
- Special Applictions Type
- T12-1605 Shape-Long reach bent chisel
- Special Applictions Type